Virtual 2 Hour OSHA Lead Awareness Training for Construction, January 27, 2022, 10:30 am – 12:30 pm

Cost: $100

OSHA 29 CFR 1926.62:

Initial and Refresher training. Annual refresher required. Attendance of the entire course, full name, attendance screenshots, and a passing quiz score are required to get a certificate.

OSHA 1926.62 requires the employer shall assure that each employee is trained in the following:

(i) The content of this standard and its appendices;
(ii) The specific nature of the operations which could result in exposure to lead above the action level;
(iii) The purpose, proper selection, fitting, use, and limitations of respirators;
(iv) The purpose and a description of the medical surveillance program, and the medical removal protection program including information concerning the adverse health effects associated with excessive exposure to lead (with particular attention to the adverse reproductive effects on both males and females and hazards to the fetus and additional precautions for employees who are pregnant);
(v) The engineering controls and work practices associated with the employee’s job assignment including training of employees to follow relevant good work practices described in Appendix B of this section;
(vi) The contents of any compliance plan in effect;
(vii) Instructions to employees that chelating agents should not routinely be used to remove lead from their bodies and should not be used at all except under the direction of a licensed physician; and
(viii) The employee’s right of access to records under 29 CFR 1910.20.

Respirator Fit Testing

Respirator fit testing must be conducted in person by a competent person. Prerequisite for those who wish to be fit tested is a medical approval form indicating the individual can wear a respirator and the respirator. Individuals must be clean shaven in the area of the respirator seal to the face with a respirator provided by the employer. Fit testing is not included in this ticket price for virtual training. Please contact leigh@chem-scope.com for more information about respirator fit testing.

Virtual Training Requirements

Requirements for attending virtual training include (1) a government-issued photo ID, (2) a PC or Mac computer, (3) a stable internet connection, (4) a functioning webcam, (5) a functioning keyboard, and (6) a functioning mouse. Tablets will not be supported. A functional headset with microphone will be recommended. Each student must be able to download and use the most recent version of Zoom. Students must be able to type to participate in worksheet-based online hands-on activities, or they must be able to print the worksheet, answer by writing, and send a picture to the instructor.

Screenshots will be taken throughout the class to document that each student is present for the entire course. Students must arrive on time to class (typically, 8:00 am EST). Students are also encouraged to be present in the class 30 to 15 minutes early to allow for troubleshooting.

Many of our students will be new to virtual training. If you have questions or concerns about whether virtual training is right for you, please contact our training instructor Leigh Elijah (leigh@chem-scope.com). For more information, see our most recent training post: https://chem-scope.com/virtual-training-and-reopening/